CNC Control Box for Mach3

$1,258.90

Add Industrial style, USB control to your Taig CNC milling machine for low cost.

Precision, control, accuracy and fine movements, via large MPG wheel.

Just plug your machine (if DB25 connection) into the Control Panel & the USB cable into the computer. Load the software drivers, Mach3 and .XML files and very quickly you've converted to USB. The whole system can be powered from a single 12V supply.


Features include:


  • MPG control of X, Y & Z
  • Feed Hold, Cycle Start, Single Block
  • Resolution selection 0.1, 0.01 & 0.001 mm
  • E/Stop button, which connects to your CNC E/Stop circuit.*
  • Button functionality can be customised in Mach3 if required
  • MPG and adjustment controls locked out in normal operation
  • Switch between automatic or manual control
  • Speed increase up to 4 million Steps/Sec per axis
  • Standalone CNC Control Panel for existing CNC machines using a parallel port connection
  • Speeds of up to 4 million Steps/Sec per axis

Its important that the Emergency Stop button is also connected, via the terminal on the Control Box, to your machines E/Stop circuit to physically cut the power when operated.

NB Due to possible differences in ground potentials, this unit should not be used where the controller is some distance from the computer. Always ensure the computer and CNC Controller are earthed to the same ground point and a good quality USB cable is used.

This item is supplied by a third party Australian manufacturer who will ship direct to you once your order is placed with us.


The Windows drivers for this hardware can be downloaded here: USB Mach3 Drivers. Be sure to save the file on your local hard drive and extract the zip file by WinZip or an equivalent program.


Add to Cart:

  • Model: 6-9021
  • Shipping Weight: 4kilos
  • 1 Units in Stock

Your IP Address is: 35.173.57.84
Copyright © 2020 Taig Australia. Powered by Zen Cart