Taig PLATINUM Jewellers Lathe Package

$2,219.00


Taig Micro Lathe II semi assembled with ER16 Headstock and includes:

  •  Headstock and tailstock risers - provides a 6 inch swing
  • 3 Jaw 3¼" diameter self-centering Scroll Chuck (steel body) with reversible aluminium soft jaws ¾-16 thread
  • 4 Jaw 3¼" diameter independent Scroll Chuck (steel body) with reversible aluminium soft jaws ¾-16 thread
  • Chuck adapter for ER16 headstock - required to attach the standard Taig chucks to the ER16 headstock spindle
  • 12 piece ER16 Collet Set, 1mm to 10 mm
  • ¼" Jacobs drill chuck industrial quality 3/8-24 thread
  • Drilling tailstock lever operated 5/8" off set with dead center 3/8-24 thread for drill chucks
  • Polyurethane V-belt (established belt life of 5 000 hours) 12½" flat length6 Step pulley for headstock spindle
  • Cross slide
  • Quick Change Tool Post with 4 holders
  • High quality cut off blade .040 x 1/2 inch HSS USA made
  • Carriage depth stop
  • Chuck depth stop for workpiece in chuck
  • Lathe dog for turning between centers
  • Full circle soft jaw set for 3 jaw chuck
  • Face plate, 3¼" diameter, ¾-16 thread mount
  • Face plate angle bracket set
  • Face plate for wood turning
  • Tool rest for wood turning
  • 6 Piece high speed steel tool bit set: left hand, right hand, 45 degree chamfer, round nose , boring bar, cut off.
  • Die holder for tailstock - accepts 13/16" and 1" die button dies
  • Slitting saw arbor; turns the lathe into a very small tablesaw
  • 0.032 x 2½" High speed slitting saw to match
  • Needle bearing centre spring loaded fits in tailstock will work at high speed without burning
  • Grinding wheel arbor; turns the lathe into a very small bench grinder useful for sharpening of tool bits and drills
  • Grinding wheel to match
  • Steady rest
  • Milling attachment mounts directly on the crosslide (2 x 3¾" table) adds a third axis to the lathe (z axis)
  • Radius turner - turns ball ends on rods
  • Top slide; mounts directly on the crosslide for cutting tapers and tapered bores in the work piece
  • "The Taig Lathe" comprehensive handbook by Tony Jeffree
  • 240V DC Variable speed motor (0 to 2,400 rpm*)
  • 2 Step pulley for motor spindle
  • Motor mounting bracket for headstock
  • Mounting bracket spacer
  • Slimline spindle wrench for changing chucks and arbors


*motor spindle speed from 0 to 6,100 rpm; use of the 6 step pulley permits speeds of up to 10,000 rpm, but comes belted using the largest pulley, which ratios the speed down to 2,400 rpm.

Please note this machine will require assembly and installation on a mounting board (not supplied). The photograph shows what an assembled machine could look like.

Instructions on lathe assembly can be found here

Items that are bolded are extra items over Taig GOLD.

For complete list of Taig Specifications, Technical Drawing and Parts.


Sold Out
  • Model: 6-0998
  • Shipping Weight: 18kilos
  • 0 Units in Stock

Please Choose:





Your IP Address is: 54.227.76.180
Copyright © 2019 Taig Australia. Powered by Zen Cart