Taig Micro Lathe II

Taig Micro Lathe II

The Taig Micro Lathe II is an excellent, good quality lathe, manufactured in the USA. It has a machined, ground and stabilised 15.5" steel bed. It has two sealed ball bearings in its spindle allowing up to 7,000 rpm spindle speed, coupled with a six speed positive V-belt drive. A precision machine with some big lathe features include large 0.001 inch graduations on the cross slide dial, adjustable tool post and carriage depth stop. With adjustable brass gibs providing full compensation for carriage and cross slide wear, it all adds up to the BEST VALUE in small lathes! The picture above is what the Taig Kit looks like when put together.

SPECIFICATIONS

Taig Micro Lathe II Parts List

GENERAL

  • Overall working accuracy: 0.0005".
  • Maximum headstock normality to bed: 0.0004".
  • Maximum taper bed dovetails over pins: 0.0001".
  • Cross slide screw: 1/4 to 20.
  • Maximum spindle speed recommended: 7,000 rpm.
  • Length of headstock on ways: 2.625".
  • Width of cross slide on carriage: 2.000".
  • Maximum bearing runout: 0.0004".
  • Maximum cross slide normality to bed: 0.0004".
  • Cross slide dial graduation: 0.001".
  • Carriage travel: 0.600" per 1 revolution of handwheel.
  • Pulley type standard: 5/8" bore multi-stop V-belt.
  • Length of carriage on ways: 3.000".
  • Bed dovetails: 45 degrees.

CAPACITY

  • Maximum turning diameter: 4.5" (extendible to 6.5" with headstock riser.)
  • Swing over cross slide: 2.375".
  • Overall length of bed: 15.5".
  • Overall length of lathe: 16.5".
  • Tool bit size standard: 1/4".
  • Drill chuck capacity: 1/4".
  • Distance between centers: 9.75" (with tailstock).
  • Carriage travel: 9.0".
  • Cross slide travel: 1.75".

SPINDLE

  • Sealed precision: ball bearing
  • Bearing OD: 1.5748", ID: 0.6692".
  • Spindle nose: 3/4" to 16 (3/4" SAE)
  • Spindle hole: 0.343".
  • Spindle ID taper: 15 degrees (30 degrees included)
  • Maximum collect diameter: 9/32".
  • Pulley size: 5/8" bore.
Your IP Address is: 54.162.154.91
Copyright © 2017 Taig Australia. Powered by Zen Cart